The TSD105A interfaces with the DA100C general-purpose transducer amplifier to measure a wide range (50g to 1000g) of forces in a variety of applications, including very fine in-vitro tissue bath work as well as larger in-vivo applications. Forces are conveyed to the strain beam via an adjustable moment, five-position, precision lever arm to insure accurate force measurements. The transducer comes with a versatile mounting rod assembly to support multiple orientations.When fine tension and position adjustments are required, clamp the mounting rod to an HDW100A Force Transducer Tension Adjuster (not included).
TSD105A Specifications
Rated Output: 1 mV/V (normalized to 1V excitation)
Full Scale Ranges: 50, 100, 200, 500, 1000 grams
Noise (rms), 1 Hz bandwidth: (Range/50)mg @ 10 volts excitation
Noise (rms), 10 Hz bandwidth: (Range/20)mg @ 10 volts excitation
Nonlinearity: <±0.025% FSR*
Hysteresis: <±0.05% FSR*
Nonrepeatability <±0.05% FSR*
30 Minute Creep: <±0.05% FSR*
Temperature Range: 10°C to 70°C
Thermal Zero Shift: <±0.03% FSR/°C
Thermal Range Shift: <0.03%Reading/°C
Maximum Excitation: 10 VDC
Dimensions: 19mm (wide), 25mm (thick), 190mm (long)
Mounting Rod: 9.5mm (dia) – variable orientation
Weight: 300g (with mounting rod)
Cable Length: 3 meters
Interface: DA100C
* These parameters assume the transducer is set for a 50g range. For all other ranges, force measurements from 10% to 90% full scale are linear to ±1.0%.
