 |  | 
The RX137 series are low flow heads for the TSD137 series pneumotach transducers. The RX137 heads can be mixed and matched with any of the TSD137 series pneumotachs. A wide range in flows can be accommodated by switching one head for another when using a single TSD137 pneumotach. RX137 heads connect to the TSD160A differential pressure transducer via standard 4mm ID tubing. Multiple RX137 heads help eliminate equipment downtime during cleaning procedures.Cleaning & Disinfection: IMPORTANT: - RX137 Series airflow heads are manufactured with a very thin layer of synthetic resin, so they should never be cleaned with an organic solvent. We recommend cleaners such as “Hydro-Merfen” at the concentration used for medical material, or “Gluterex.”
- Before using the airflow head, be sure it is dry.
- Never heat the airflow head higher than 50° C.
- Submerge the airflow head in a disinfectant solution for approximately one hour.
- Rinse the airflow head with tap water.
- Rinse the airflow head with distilled or de-mineralized water.
- Use compressed air or another compressed gas [pressure up to 5kg / cm2 (5 bar)] to drive any remaining water out of the airflow head.
- Allow the airflow head to dry completely in ambient air (or continue using compressed air if time requires it).
RX137H Specifications
Range (ml/sec): ±8000
Dead Space (ml): 80.0
Length (mm): 60
Flow Ports (ID-mm): 43
Flow Ports (OD-mm): 45
Weight (grams): 250
Air Flow Head Options:
RX137A ±12 ml/sec Small Mouse @ 30gm
RX137B ±20 ml/sec Mouse @ 50gm
RX137C ±60 ml/sec Rat/Guinea Pig @ 350gm
RX137D ±150 ml/sec Cat/Rabbit @ 750gm
RX137E ±350 ml/sec Small Dog @ 5.5kg
RX137F ±1200 ml/sec Medium Dog
RX137G ±3000 ml/sec Large Dog
RX137H ±8000 ml/sec Adult Human
|
|
